How to Frame Stained Glass With Zinc Came

how-to-frame-stained-glass-with-zinc-came-image-4

If you are looking for a way to frame stained glass using zinc came, you have come to the right place. This article has all the information you need to get started.

Cascade Metals

What does a lead or lead rod do for you? It helps to have a bit of luck. For example, you can get a better price if you are lucky. You can also get your lead rod and other supplies simultaneously. To top it off, you can get the best local prices by ordering online. You can get a free sample of the wares. Of course, not all stained glass windows are created equal, so if you’re an experienced glass artisan, you’ll probably want to go with a more upscale supplier. The company has a good selection of complex and soft stuff.

Handy Hanger Inserts

Handy Hanger Inserts for stained glass are a great way to attach your glass to a frame without needing a key ring or washer. The name of the game is to make sure that the inserts are placed at the right spots on edge. If the inserts are not in the right place, it is more likely that the project will fall off the wall.

One of the first steps is to file the grooves in the frame. The best way to do this is with a half-round file. The resulting hole should be slightly larger than the opening of the Handy Hanger. To ensure proper alignment, you should bend the Handy Hanger to the required radius.

The best way to ensure that your inserts are a hit is to have all the framing done before you begin. This will prevent any problems with the installation process later. In addition, you should have the stained glass panels framed before installing the handy hanger inserts. These will not only improve the finished appearance of your projects but also eliminate any potential issues down the road.

How to Frame Stained Glass With Zinc Came image 3

Choosing the proper inserts for your particular project can take time and effort. Some inserts are designed to be inserted in specific metals, while others are not. If you have a metal framed panel, opt for the inserts explicitly made for u-channel frames. If you have a piece zinc bound the discussion, you will have to think outside the box. However, the results will be well worth the effort.

The Handy Hanger of the rings can hang several different types of glass. They can be used on glass pieces that are fusing, or they can be hung on the inside or outside of a window. These can be purchased in various shapes and sizes, including the mini Ellie hangers designed to fit between two layers of glass. The Finley line of handy hangers is machine-torqued and made from high-temperature nickel-chromium.

U-Channels

When you want to add a solid border to your stained glass panels, you’ll need to frame it with zinc came. Aside from adding a clean look, the metal also provides structural strength to the glass. You can purchase a variety of sizes and widths of zinc came. Choosing the right one depends on your needs and experience.

If you’re working with a panel with straight lines, you may want to choose a “U” shape zinc came. However, for larger projects, you’ll need a wider zinc came. This will also make it easier for you to work with.

If you need more clarification about the exact size of your panels, you can use a gauge card. This is made of light cardboard with three tick marks indicating the outside metal dimension. You can hang the card on your wall for easy reference.

How to Frame Stained Glass With Zinc Came image 2

If you’re working with curved lines, consider using a lead came. The charge comes in a wide variety of shapes, which makes it easy to bend. You should also note that information is soft and can pull away from the glass. Therefore, you’ll need a lot more solder than with zinc.

You can also use copper wire to finish free-form shapes. Aside from its versatility, you’ll get a nice black patina with this metal. You can also add a little copper foil to the inside of your panel for a unique look.

When you’re finished with your project, you’ll need to use a came bender tool to shape your zinc. Once you’ve done this, you’ll need to solder the edges of your piece. You’ll need to ensure that the edges are abutted to place hooks for hanging. This will allow you to achieve a more professional look.

You can buy a zinc bender at most hardware stores. You’ll also need a saw to cut the metal came channels. The saw should be specifically designed to be used with metal came. For instance, you should never use a woodworking chop saw on metal came.

Zinc is usually sold by the pound, so you’ll have to purchase enough to complete your project.

How to Frame Stained Glass With Zinc Came image 1

Box Channels

Stained glass zinc came frame is a great way to add a finished edge to your stained glass panels. However, you’ll need to ensure your zinc came frame is the right size for your window. If you’re working on a large piece of glass, you should use a more comprehensive came to ensure that the weight is distributed evenly along the sides.

A “U” shape is an excellent choice for framing your panel. There are three types of zinc came that you can use for your project. Full-length zinc will fit along your window’s left and right sides. The tab at the end will be attached to your door or window. It can also be bent to the shape of your frame.

A Handy Hanger Insert is another option for framing your stained glass project. These are designed to be inserted inside your U-channel frame, eliminating the need to use paper clips or washers to hold the edge in place. You can also attach these to your project wall openings or other openings.

You can check out our tutorial for more details on how to frame your stained glass. It includes a basic overview of zinc framing and how to solder it. This tutorial is perfect for beginners and will show you how to achieve a professional look. You’ll also learn how to create box channels and measure and cut your panels.

In addition, you’ll learn how to use your Handy Hanger inserts to help prevent your window from sagging. It will also teach you how to add a clean, finished edge to your stained glass.

How to Frame Stained Glass With Zinc Came image 0

The next step is to cut the channels using a razor saw or a hacksaw. You’ll need a set square and a metal file to use with your saw. You can get kits with these at most hardware stores.

Finally, apply a little bit of flux to your Handy Hanger tab. After that, you can place it in the groove of your frame. You can bend it with your flathead screwdriver to fit the radius of your structure. It’s a good idea to use a half-round file for this process.

Like this post? Please share to your friends:
Leave a Reply

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: